|
|
| |
|
Automates sample login and sorting, cap removal, centrifugation, serum level measurement and aliquotting.
|
|
Product Features
|
|
|
|
Sample Processing Mode:
|
-
Operator places bar-coded samples on the system
-
Power Processor sends sample receipt message to LIS
-
Non-centrifuged samples are sorted to proper sample rack
-
Remaining samples are centrifuged and decapped
-
Samples that do not require aliquotting are routed directly to the proper work areas
-
Samples that do require aliquotting go through the following steps:
- Volume of available serum or plasma is measured
- Aliquot tubes are prepared/labelled
- Appropriate volume of sample is dispensed into each aliquot tube
-
Aliquots and samples are routed to proper work areas
|
|
Sample Mapping Mode:
|
-
Mapping operator selects sample mapping mode and places samples from off-line analysers on the system
-
The system loads storage racks and records rack position and sample ID
-
Retrieval operator enters sample ID; the system displays sample ID, rack ID and sample position for easy retrieval
|
|
Includes:
|
-
Inlet station
-
Hematology outlet for non-centrifuged samples
-
Automated centrifuge and centrifuge conveyor
-
Decapper
-
Intelligent aliquotter (serum level detector, labeller and pipettor)
-
One outlet for spun samples going to non-connected workstations
-
Sample carriers and line controller computer
-
PrepLink 3.0 computer and software
-
Generic racks
|
|
|
|
|
|
|
|
|
|
