|
Biomek Device Controller
|
|
The Biomek device controller module is designed to supply seven (7) digital input and outputs to control digital devices on the Biomek work area. The Biomek software controls the devices through the Biomek device controller module.
|
| Part No. |
Description |
| 719366
|
Biomek Device Controller
|
|
|
|
|
Biomek Disposable Tip Loader ALP
|
|
The Biomek Disposable Tip Loader ALP provides automated loading and unloading of
all types of AP96 and AP384 P30 disposable tips for the Biomek 96 and 384 channel
pipettors. The tips are loaded via pneumatic pressure for reliable loading, thereby
minimizing the stress on the pipetting system. Includes automated tip loader, tubing, and
CAN communications cable. Requires: 40 PSI clean dry air, 2.5 cfm. Maximum of 4 Tip
Loaders may be integrated onto the Biomek work area.
|
| Part No. |
Description |
| 719356
|
Biomek Disposable Tip Loader ALP
|
|
|
|
|
|
Biomek Disposable Tip Wash ALP, 96-Channel
|
|
|
|
Includes wash station, wash pump, supply tank, and drain/waste tank, ALP platform. Tip Wash ALPs can be configured in the outer most columns and back row of instrument.
NOTE: Requires Biomek Device Controller (P/N 719366).
The Biomek Disposable Tip Wash ALP 96-Channel is controlled by the Biomek System Software via the Biomek Device Controller. The washes can be manually configured or automatically configured. The Tip Wash ALP provides a constant flow of liquid into 96 individual channels to wash the exterior of the pipetting tip. The inside of the tip is washed by aspirating and dispensing from the flow of liquid. The tip wash ALP reduces running costs by curtailing or eliminating the use of tips. Multiple tip wash ALPs can be configured for differing liquids or for specific pipettors.
|
| Part No. |
Description |
| 719363
|
Biomek Disposable Tip Wash ALP, 96-Channel
|
|
|
|
|
|
Biomek Tip Wash, 96 Channel - Manifold Only
|
|
Manifold only. Used to convert a 384-channel Tip Wash to 96-channel.
|
| Part No. |
Description |
| 719820
|
Biomek Tip Wash, 96 Channel - Manifold Only
|
|
|
|
|
|
Biomek Disposable Tip Wash ALP, 384-Channel
|
|
Includes wash station, wash pump, supply tank, and drain/waste tank, ALP platform.
Tip Wash ALPs can be configured in the outer most columns and back row of instrument.
NOTE: Requires Biomek Device Controller (P/N 719366).
The Biomek Disposable Tip Wash ALP 384-Channel is controlled by the Biomek System Software through the Biomek Device Controller. The washes can be manually configured or automatically configured. The Tip Wash ALP provides a constant flow of liquid into 384 individual channels to wash the exterior of the pipetting tip. The inside of the tip is washed by aspirating and dispensing from the flow of liquid. The tip wash ALP reduces
running costs by curtailing or eliminating the use of tips. Multiple tip wash ALPs can be configured for differing liquids or for specific pipettors.
|
| Part No. |
Description |
| 719622
|
Biomek Disposable Tip Wash ALP, 384-Channel
|
|
|
|
|
|
Biomek Tip Wash, 384 Channel - Manifold Only
|
|
Manifold only. Used to convert a 96-channel Tip Wash to 384-channel.
|
| Part No. |
Description |
| 719821
|
Biomek Tip Wash, 384 Channel - Manifold Only
|
|
|
|
|
|
8-Channel Tip Wash ALP
|
|
For washing Biomek Fixed Tips. Includes drain/waste tank and ALP platform. Can be located
in the outermost columns and back row of instrument. NOTE: Uses system liquid for rinsing
via syringe pumps. Faster washing can be provided using the optional Biomek Speed Pump
(P/N 719653). The Tip Wash ALP provides individual cavities where system liquid flows
through each of the eight channels to clean the interior of the tips. The exterior of the tips
are cleaned as the system liquids overflows each cavity. Multiple tip wash ALPs can be
configured for differing liquids or for specific pipettors.
|
| Part No. |
Description |
| 719654
|
8-Channel Tip Wash ALP
|
|
|
|
|
|
Biomek Span-8 Active Wash Kit
|
|
Kit includes two five-gallon reservoirs for source and waste liquids, Span-8 Wash ALP, Tygon*
and PharMed* tubing, variable speed pump, and installation instructions.
The active wash ALP performs similarly to the Biomek multichannel wash stations. Designed to
actively wash the outside of the Biomek probes and tips and provide a source of fresh water.
|
| Part No. |
Description |
| 987839
|
Biomek Span-8 Active Wash Kit (220V)
|
| 394134
|
Biomek Span-8 Active Wash Kit (110V)
This has the same functionality as the Biomek MultiChannel Wash Kit (220V)
|
|
|
|
|
|
Positive Positioning ALP
|
|
|
|
Provides automated clamping and positioning of 1,536-well plates for access by the Biomek 384-Channel Pipettor. The plates are clamped by a solenoid for reliable pipetting operations. The clamp is relaxed during non-use periods, thereby reducing potential heat build up. Multiple Positive Positioning ALPs may be integrated onto the Biomek work area as needed.
|
| Part No. |
Description |
| 719856
|
Positive Positioning ALP
|
|
|
|
|
|
Biomek Cooling/Heating ALP, Single-Position
|
|
Includes single-position cooling and heating ALP. Positionable in any location on the Biomek work area. User must supply reservoirs and a circulator bath with the following minimum specifications: Range: -20°C to 100°C; Flow Capacity: 7-15 L/minute; Max Pressure: 2.1 PSI; Reservoir Capacity: 6 L; Heating Capacity: 1,000 W; Cooling Capacity: 120 W at 0°C.
|
| Part No. |
Description |
| 719361
|
Biomek Cooling/Heating ALP, Single-Position
|
|
|
|
|
|
Biomek Shaking ALP (Linear), Single-Position
|
|
|
|
Includes single-position linear shaking ALP, CAN communications cable. Requires: 40 PSI clean dry air, 2.5 cfm. Positionable in any location on the Biomek work area.
|
| Part No. |
Description |
| 719352
|
Biomek Shaking ALP (Linear), Single-Position
|
|
|
|
|
|
Biomek Shaking ALP (Orbital), Single-Position
|
|
Includes single-position orbital shaking ALP, CAN communications cable. Positionable in any location on the Biomek work area.
|
| Part No. |
Description |
| 379448
|
Biomek Shaking ALP (Orbital), Single-Position.
|
|
|
|
|
|
Biomek Magnetic ALP, Single-Position
|
|
Includes single-position magnetic ALP, CAN communications cable. Positionable in any location on the Biomek work area.
|
| Part No. |
Description |
| 379447
|
Biomek Magnetic ALP, Single-Position
|
|
|
|
|
|
96-Well Post Magnet
|
|
The Magnabot 96 well Magnetic Separation Device is a 24-pin magnetic separation device
designed for high-throughput bioseparation using magnetic particles, such as Promega's
Magnesil* Paramagnetic Particles. The Magnesil* technology allows for the use of
paramagnetic particles in applications such as automated plasmid purification or PCR* clean-up.
|
| Part No. |
Description |
| 379511
|
96-Well Post Magnet
|
|
|
|
|
|
96-Well Flat Magnet
|
|
The flat bar magnet is a magnetic separation device for use with v-bottom plates or thermal-
well plates. It is designed for high-throughput bioseparation using magnetic particles, such as
Promega's MagneSil* Paramagnetic Particles, in applications like automated plasmid
purification or PCR* clean-up.
|
| Part No. |
Description |
| 379512
|
96-Well Flat Magnet
|
|
|
|
|
|
Biomek Stirring ALP, Single-Position
|
|
Single-position magnetic stirring ALP. Position in any location on the Biomek work area. Magnetic stir bar not included.
|
| Part No. |
Description |
| 719346
|
Biomek Stirring ALP, Single-Position
|
|
|
|
|
|
Bar Code Reader ALP for Microtiter Plates
|
|
Single bar code reader ALP. Equipped with bar code reader. Position in any location on the Biomek work area.
|
| Part No. |
Description |
| 719365
|
Bar Code Reader ALP for Microtiter Plates
|
|
|
|
|
|
Biomek Refilling Reservoir ALP kit
|
|
Kit includes pump, tubing, reservoir, and fittings. Pump is contained in the communication box
which connects to the Biomek CAN bus. Pump is controlled by the Biomek Software and users
can fill and drain the reservoir. When in use, reservoir will fill when liquid volume trips sensor
in the reservoir. This unit keeps the liquid from being exposed when it's not needed. Excess
liquid can be drained back into the source container for future use or easy cleanup.
|
| Part No. |
Description |
| 989895
|
Biomek Refilling Reservoir ALP kit
|
|
|
|
|
